# You asked: How much does roofing asphalt weigh?

Contents

A bundle of three-tab asphalt shingles weighs between 60 and 80 pounds, but this may vary depending on the quality and type of shingle. Generally, three bundles of shingles are enough to cover 1 square of roof (100 square feet), which can weigh anywhere from 180 to 240 pounds.

## How much do asphalt shingles weight per square foot?

Roofing Material Weight Table

Weight of Roofing Materials
Roofing Material Pounds per Square Foot (lb/ft2) Pounds per Square (100 Sq. Ft.)
Asphalt Shingles “3-Tab” or “Strip” 1.95 lbs 195 lbs
Asphalt Shingles “Architectural”, “Dimensional”, or “Laminate” 3.05 lbs 305 lbs
Asphalt Shingles “Luxury” 4.25 lbs 425 lbs

## How much does a roof weight per square foot?

The dead load of a typical asphalt-shingled, wood-framed roof is about 15 pounds per square foot. The load increases with the use of heavier roofing material. A clay-tiled roof may have a dead load of as much as 27 psf.

## What is the average weight of a roof?

Depending upon the type of material you choose, the roof on a 2500 square foot home may be as little as 1750 pounds or as much as 50,000 pounds.

## How much does a flat roof weigh?

Standard Roof Weight

Typically, the dead load for shingled roofs is roughly 20 pounds per square foot. Roofs that are made of sturdy material like concrete, metal or clay tile can support dead loads at 27 pounds per square foot.

## How many bundles of shingles do I need for 2000 square feet?

The number of bundles or squares you need will depend on the surface area of your roof, and its pitch or slope. For example, a 2,000 square foot roof will require 20 squares or 60 bundles. A professional will likely purchase slightly more materials than necessary to ensure there is extra material if needed.

## How many square feet are in a square of shingles?

A roofing square is equal to 100 square feet of the roof.

## Can my roof hold my weight?

While the average roof can withstand 20 pounds per square foot, there’s a huge range in the weight of snow: Fresh, light snow can weigh just 3 pounds per square foot… so your roof may be able to hold over 6 feet of it. Wet, heavy snow can weigh 21 pounds per square foot… so a foot of it could risk collapse.

## Can I fall through my roof?

While a roof is designed to handle weight and pressure that is distributed across the tresses, it is not designed for this concentrated force. If your roof is in a state of disrepair or lacks structural integrity, this excessive stress could actually cause you to fall through the roof!

Dead loads pertain to the weight of the roofing structure along with the permanent components of the residential property. Dead loads also include the weight of the construction materials. … The dead load of asphalt shingle roofs with wooden frames is usually 15 pounds per square foot (psf).

IT IS INTERESTING:  What pitch should a flat roof have?

## Does walking on a roof damage it?

Other than physical harm, walking on the roof of a building can actually cause damage to roofing materials. … This shortens the roof’s lifespan and degrades the shingles. There is no need to walk on the roof unless it is for the rare and occasional repair. It is not a good idea to walk upon a roof for any other reason.

## Can you walk on house roof?

Is It Safe to Walk on My Roof? In general, walking on the roof of your property isn’t a safe. Any repairs that require access are best left to the professionals, but if you’re an expert DIYer (and have a good head for heights) you might want to try minor jobs yourself. If so, it’s essential to take precautions.

## What is heavy roofing?

A heavy roof is a roof with roofing material (cladding and sarking) having a mass exceeding 20 kg/m2 of roof area but not exceeding 60kg/m2 i.e. concrete tiles, slate.

## Can I put a deck on my flat roof?

Building a deck over a flat roof is very similar to building a deck over a concrete patio. … Then, you will install “sleepers” or flat 2x6s laid flat every 16” on top of the roof surface. This will provide the surface for you to attach the decking.

## How do you calculate the weight of a roof sheet?

The formula for weight calculation is:

1. l = length in mm.
2. w = width in mm.
3. t = thickness in mm.
4. η = Specific material density ( e.g.: steel = 7.85 kg / dm³)