# Question: How many coils of roofing nails are in a box?

Contents

Typical box count is 7,200 nails per box, with 120 per coil.

## How many coils come in a box of roofing nails?

120 Nails/Coil. 7,200 Nails/Box.

## How many square of shingles will a box of coil nails?

I estimate one coil of nails for every bundle of 3-tab shingles. This is based on the following: 27 shingles per bundle; 4 nails per shingle in the field; 2 to 6 nails per shingle at rake edges; 120 nails per coil. The actual usage will be 108 nails for every bundle in the field, so an estimate of 30 sq.

## How many roofing nails are in a 30 pound box?

2″ roofing nails are approx 150-160 per pound. 3″ roofing nails are approx 90-100 per pound. This is for electro-galvanized nails, hot dipped will be a little less nails per pound.

## How many roofing nails are in a 5lb box?

Beside above, how many 16d nails are in a 50lb box? 44 Nails per pound approx. Nail Quantity per Square Shingle manufacturers recommend using four nails per shingle in the main part of the roof and five nails per shingle in the first row.

How many 10d nails are in a 5lb box?

IT IS INTERESTING:  How much overhang should you have on a roof?
Size Common Box
10D 70 90
12D 50 70

## How many square feet does a box of roofing nails cover?

The actual usage will be 108 nails for every bundle in the field, so an estimate of 30 sq. per box of 7200 seems conservative until you factor in drip edge, hips, ridges, valleys and flashing.

## What is the shortest roofing nail?

Short Nails in Shingles

• The minimum fastener length for an asphalt shingle roof in Minnesota is 1-1/4″. …
• When 1″ nails are used to fasten asphalt shingles to 1/2″ roof sheathing, only the very tip of the nail will penetrate the roof sheathing.

17.07.2012

## What size nails should I use for shingles?

NRCA does not recommend the use of staples for fastening asphalt shingles. Roofing nails should be round-headed, sharp-pointed 11-gauge galvanized steel or the equivalent corrosion-resistant roofing nails. Nail head sizes recommended are 3/8-inch to 7/16-inch diameter. Nail heads should be low profile, smooth and flat.

## How many pounds is 2 Inch Nails?

Electro-galvanized Common

Size Nail Length Count per Lb.
5d 13/4″ 194
6d 2″ 181
8d 21/2″ 99
10d 3″ 69

## How many nails do I need for synthetic underlayment?

One of the factors that add up the roof weight estimation is the nails’ weights that will hold the roof underlayment and shingles in their place. The majority of roofing manufacturers advise that you use four nails for each shingle for the roofing main area and use five nails for each roofing underlayment square.

## How big is a 16d nail?

What is a 16d Nail? A 16d nail is one that is 3-1/2 inches long.

IT IS INTERESTING:  Will bleach clean roof tiles?

## How long should roofing nails be?

Proper Nail Application For Asphalt Shingles

Nails should have a minimum, nominal shank diameter of 11- or 12-gauge, and a minimum head diameter of three-eighths of an inch. The length of each nail must be a minimum of 1¼ inches long, and for roof-overs, Atlas recommends a nail length of at least 2 inches.

## What is an 8d nail?

The “d” stands for penny, so 8d refers to an 8-penny nail, 16d to a 16-penny nail and so on. It’s a way to indicate nail length, as you can see in the table below. … Others say that the number and the “d” indicate that one 16d (3-1/2 inch) hand-forged nail cost 16 pennies.

## How many 16d nails are in a 5 pound box?

RoHS

Container Type Box
Product Weight 5
UOM box
Catalog Page BBV11, Page 01-342
Notes 49 Nails per pound approx.

## How heavy is a box of nails?

A box of nails weighs 1-5/6 pounds.

## How big is a 10 penny nail?

Note: The ‘d’ means ‘penny’. For example, a ’10d nail’ is a ’10 penny nail’. In the United States, the length of a nail is designated by its penny size, written with a number and the abbreviation d for penny; for example, 10d for a ten-penny nail.

How big is a 10 penny nail?

Penny (d) = Inches
10d 3”
12d 3-1/4”