When can you cross a fragile roof?
Fragile surfaces and materials will not safely support the weight of a person and any materials they may be carrying. All roofs, once fixed, should be treated as fragile until a competent person has confirmed that they are non-fragile.
What is classed as a fragile roof?
What is the definition of a fragile surface and how can we determine whether or not a roof is fragile? … A roof should always be treated as fragile until a competent person has agreed otherwise. Fragility may be caused by: general deterioration of the roof through ageing, neglect and lack of maintenance or weather damage.
What should be used to avoid injury when working over a fragile roof?
using stagings or platforms with guardrails on the roof surface to spread the loads. protecting fragile areas such as rooflights with covers to prevent access onto the surface.
What should be used while working with fragile roofs?
The number of cat walk ladders issued to each person on roof is enough. There must be at least 3 ladders available to each person on the roof. Protection is needed when anyone passes or works nearer than 2 m to fragile material / roof . a) During access along valley gutters in a fragile roof area.
What is the best way to stop people falling through fragile roof panels?
Kee Cover is a mesh cover that protects workers against falls through fragile roof lights. The mesh panel top sits onto a metal frame made from Kee Klamp fittings and tube. Kee Cover is suited to metal profile roofs where inline roof level skylights are common.
What is the best way to stop people falling through voids?
use mesh guards or covers which are permanently fixed into concrete floors – these provide protection to all workers throughout the job. protect voids from underneath – using fixed scaffold.
What is fragile material?
Fragile Material is a surface or assembly that is liable to fail either from the weight of anyone crossing, working or falling on it. (Here, the person’s weight includes the weight of anything that they may be wearing and carrying).
What are the hazards of scaffolding?
Injuries due to the collapse of scaffolds, caused for example by improper Page 2 erection or securing, use of faulty structural elements, accidental demolition or dislodging by moving vehicles, including trucks and forklifts, overloading or improper load distribution, etc.
What is crawling board?
A plank with cleats spaced and secured at equal intervals, for use by a worker on roofs; not designed for transporting material.
What is the main legislation that covers work at height?
The purpose of The Work at Height Regulations 2005 is to prevent death and injury caused by a fall from height. If you are an employer or you control work at height (for example facilities managers or building owners who may contract others to work at height) the Regulations apply to you.
What counts as working at height?
Work at height means work in any place where, if precautions were not taken, a person could fall a distance liable to cause personal injury. You are working at height if you: work above ground/floor level. could fall from an edge, through an opening or fragile surface or.
What are the specific risks in confined space?
What are the hazards? Working in a confined space is dangerous because of the risks from noxious fumes, reduced oxygen levels, or a risk of fire. Other dangers may include flooding/drowning or asphyxiation from some other source such as dust, grain or other contaminant.
How many rungs should you leave at the top of a ladder as a handhold?
they are competent – users should be trained and instructed to use the equipment safely; the ladder or stepladder is long enough – for ladders: – don’t use the top three rungs (see Figure 9); – ladders used for access should project at least m above the landing point and be tied; alternatively a safe and secure …
What is the maximum safe working height of a low level platform?
The risks of low-level work
Low-level access equipment is used just as much as high-level access equipment – but it’s rarely associated with health and safety risks. Low-level access solutions are defined as access solutions with a maximum platform height of 2.5m.
How can hazards associated with working at heights be controlled?
where work at height cannot be easily avoided, prevent falls using either an existing place of work that is already safe or the right type of equipment. minimise the distance and consequences of a fall, by using the right type of equipment where the risk cannot be eliminated.