Beyond the potential of falling off, there is the actual damage to the roof that may occur as a result of your walking on it. Walking on your asphalt shingles can leave the shingles bare, dislodge them or create gaps that can increase the potential for leaks.
Does walking on roof damage?
Other than physical harm, walking on the roof of a building can actually cause damage to roofing materials. … This shortens the roof’s lifespan and degrades the shingles. There is no need to walk on the roof unless it is for the rare and occasional repair. It is not a good idea to walk upon a roof for any other reason.
How do you protect your roof when walking?
Walk Pads — The Roof on Top of the Roof. If you own a building with a high-traffic roof, you have to take extra steps to minimize damage. Walk pads are thick strips made of the same material as the roof itself. They should be placed around the machines and systems that require frequent maintenance.
Can I walk around on my roof?
First off, we don’t recommend that you walk on your concrete tile roof, if you can avoid it. And neither do tile manufacturers. … Every time you walk on the tiles, you put stress on them that can crack them or loosen them. And that can lead to missing tiles and leaks.
How do you walk on a shingle roof without damaging it?
How to Walk on a Shingle Roof
- Inspect your roof visually before attempting to walk on it. …
- Use small, controlled steps when walking on the shingle roof. …
- Lay a roofing ladder across the shingle roof if the pitch of the roof is too high and you are not comfortable walking on it.
Can my roof hold my weight?
While the average roof can withstand 20 pounds per square foot, there’s a huge range in the weight of snow: Fresh, light snow can weigh just 3 pounds per square foot… so your roof may be able to hold over 6 feet of it. Wet, heavy snow can weigh 21 pounds per square foot… so a foot of it could risk collapse.
Is it OK to sit on your roof?
While your roof is designed to withstand a wide variety of abuse and damage, the simple act of walking or sitting on a roof creates a hazard that the roof isn’t necessary made to withstand. … And all of this ignores what’s possibly the most important reason to not sit or walk on your roof.
What type of shoes do roofers wear?
Rockport “Kingstin” Work Shoe
It’s a regular slip-on Oxford look, but these work shoes are ideal for roofers because they have a comfortable nylon mesh insole, a shock absorbing heel pad and footbed, along with a slip-resistant outsole. They’re water resistant, too.
What kind of shoes do roofers wear?
Best Shoes for Roofing Work and Metal Roof – Comparison Chart
|Best Shoes for Roofing||It’s Best for||Types|
|Red Wing Heritage Men’s Classic Moc Boots||Runner Up||Ankle Work Boots|
|WOLVERINE Men’s Overpass 6″ Composite Toe Boot||Best Value||Ankle Work Boots|
|Georgia Boot Men’s Georgia Steel Toe Shoes||Best for Outdoor||High Work Boots|
How much weight will a roof hold?
California building code sets minimum standards for roof load-bearing capacity. At minimum, any roof which may be used by maintenance workers must hold 300 pounds concentrated. Concentrated means that this weight can be held by any one spot on the roof.
How do I stop slipping on my roof?
Here are some tips for working safely on a roof:
- Leave steep and/or high roof work to the pros. …
- Pick a clear, calm, cool time of day to work on roofs. …
- Wear shoes with a soft rubber sole for extra traction.
- Keep the bottom of your shoes free of mud and dirt, and the roof swept clear of dirt and debris.
How do I make my roof grip better?
3) Wear shoes or boots that provide traction – Boots or shoes with rubber tracked soles will provide better traction than footwear with flat bottoms. If you’ll be walking on a surface that has a moderate or steeper slope, wear rubber soles even if the roof is dry.
Is it OK to walk on your roof to clean gutters?
In general you are fine to walk on your roof but to clean your gutters, just use a ladder and get the leaves out. It should be also less dangerous to do via ladder.