What GAF Shingles Can I Use For Low Slopes? Almost all GAF shingles can be installed on slopes as low as 2:12 provided that the shingle application instructions are followed as printed on the inside of the shingle bundle wrappers. Any slope limitations will be indicated in the instructions.
What is the least amount of pitch for shingles?
What is the Minimum Slope for an Asphalt Shingle Roof. The short, simple answer is 2:12 has traditionally been considered the absolute minimum acceptable roof slope suitable for asphalt shingles. Asphalt shingles continue to be the most widely installed roof covering option in North America.
What type of roofing is best for a low pitch roof?
Metal roofing systems are popular because of their longevity and durability. Rubber roofs are a top choice for flat or low pitched roofing as it adheres to the roofing materials below it and, when installed correctly, provides a watertight seal to the elements.
Can I put shingles on a low pitch roof?
Roofing shingles can still be installed on a low sloped roof, provided that minimum roof slope for shingles as met the requirements. In order for a roofer to properly install most types of shingles on a roof, the roof should have a minimum slope of 2/12.
How do you waterproof a low pitch roof?
Low-pitch roofs are usually waterproofed through the use of a roof membrane, which can be made from synthetic rubber, a thermoplastic such as PVC, or modified bitumen. Any of these materials can effectively carry water off the roof without allowing it to pool anywhere or penetrate vulnerable areas and cause damage.
What is the lowest slope for asphalt shingles?
Minimum Pitch/Slope of An Asphalt Shingle Roof
Shingles of all types need to have a slope to function properly. The minimum requirement is 2/12. The 2/12 number is rise over run or two units of vertical for every 12 units horizontal. That works out to about nine degrees if that works better for you.
Can a roof be too flat for shingles?
Can a roof be too flat for shingles? The direct answer to this question is yes. You should not shingle a flat roof. Different roofing materials require different slopes or pitches.
Can I shingle a 3/12 pitch roof?
The National Roofing Contractors Association recommends that asphalt shingles be installed only on roofs with slopes that are 3/12 and greater.
What does a 4/12 pitch mean?
A roof that rises 4 inches for every 1 foot or 12 inches of run is said to have a “4 in 12” slope. … The slope ratio represents a certain amount of vertical rise for every 12 inches of horizontal run. For example, a “4 in 12” slope can be expressed as the ratio of 4:12. A “6 in 12” slope is expressed as 6:12.
What is considered a low pitch roof?
Low- slope roofs typically have a minimum slope of one-fourth inch vertical to twelve inch horizontal (¼:12 or 2 percent) depending on the roofing material. Roofs are considered low-slope roofs up to 3:12 pitch. Low-slope roofs traditionally have been constructed with an asphalt built-up roof covering.
Are metal roofs good for low pitch roofs?
Metal roofing systems, such as a standing seam roof or a corrugated metal roof, are ideal for low-slope applications that aren’t “flat” roofs. These metal panels come in large sheets that cover the length of your roof from your ridge to your gutter.
How long does a low pitch roof last?
Both PVC and TPO are single-ply membrane roof systems designed for low slope roofs. Both systems have hot air welded seams that are strong and durable. A lifespan of 15 to 25 years is what you can expect from a quality TPO membrane roof.
What kind of roof do I need for a 2 12 pitch?
Metal roofing made of steel and copper are ideal for shallow-pitched roofs. In fact, a properly installed metal roof can be used on roofs as shallow as 1/2 inch/12 inches, which is almost flat.
Can you put asphalt shingles on a 1/12 pitch roof?
The asphalt shingle manufactures recommend that you install asphalt shingles on a recommended minimum of 4 in 12 or greater however most manufactures will warrant their shingles down to a 2 in 12 pitch if the recommended installation method is used.
What pitch should my roof be?
The most commonly used roof pitches fall in a range between 4/12 and 9/12. Pitches lower than 4/12 have a slight angle, and they are defined as low-slope roofs. Pitches of less than 2/12 are considered flat roofs, even though they may be very slightly angled.