What type of plywood is used for roofs?

Is OSB better than plywood for roofing?

OSB takes longer than plywood to get saturated, but also takes much longer to dry out. When used as roof sheathing, this tendency to hold moisture means it will degrade faster than plywood when exposed to chronic leaks.

What is the best type of plywood for roofing?

Builders love plywood for its water resistance, structural stability and low cost. They also love oriented strand board, though. It costs even less and is comparable to plywood on the other two counts, and they increasingly prefer OSB for roof sheathing. Either is an acceptable choice in most jurisdictions.

What type of wood should be used for roofing?

Oriented strand board (OSB) – OSB is the most common type of material used for roof decking. It’s durable and readily available, and has relatively low costs. OSB is made of interwoven strands of wood bonded with adhesive.

IT IS INTERESTING:  How long does corrugated bitumen roofing last?

What is the plywood on a roof called?

The plywood that is used for roof decking is usually known as sheathing. Sheathing carries a grade stamp that indicates its load and span ratings, as well as other performance facts.

Which is stronger OSB or plywood?

Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.

How much plywood do I need for a roof?

Divide the total roof area by 32 to get the number of sheets you will need to cover the roof. A typical 4 foot by 8 foot sheet of plywood covers 32 square feet. If your roof area is 1,600 square feet, 1,600 divided by 32 will mean you need about 50 sheets to cover the roof.

What grade of plywood is used for roof sheathing?

1/2 or 3/4-inch Plywood for Roof Sheathing? – Traditionally, 1/2-in CDX plywood was common choice with 24-in rafter spacing. However, heavier roof loads may require the use of 3/4-in CDX plywood for roof sheathing. Roofs with less pitch often carry heavier loads, including snow and ice accumulations in the winter.

How much does a sheet of roofing plywood cost?

Your price could vary depending on how much the roofing company charges for labor, but generally, you can expect to spend between $70 to $100 for each sheet of plywood. A 4 x 8 sheet of plywood covers about 32 square feet of roof area—and the average roof measures about 3,000 square feet.

IT IS INTERESTING:  Is there white EPDM roofing?

How much is a sheet of plywood?

Cabinet Grade Plywood

Thickness Type Price
1/4″ Oak Plywood $25.97
1/2″ Oak Plywood $42.97
1/2″ Birch (3 ply) $41.97
3/4″ Birch (5 ply) $44.97

What kind of wood do you use for roof rafters?

Kiln-dried Douglas fir wood presents the number one choice for building a rafter-styled roof in a wood frame house.

Do I need treated timber for roof?

The simple truth is that you do NOT need to treat timber. … The same goes for actual rot by fungus – timber is simply NOT going to rot if it is kept dry.

What size wood do you use for rafters?

Max. Live Load 20 lbs/ft2 (956 N/m2)

Maximum Span (ft – in)
Nominal Size (inches) Rafter Spacing, Center to Center, OC (inches) Lumber Grade
2 x 10 16 25′
24 20′ – 9”
2 x 12 12 33′ – 6”

Should plywood go under metal roof?

For many applications, a layer of plywood underneath your metal roofing is an unnecessary expense. … Boards measuring 1 inches by 4 inches or 2 inches by 4 inches are commonly used for purlins, though never use treated lumber because it will corrode the steel roof and fasteners.

Does new roof include plywood?

If you are getting a new roof, while you may not necessarily need to have the plywood decking replaced, you should have it carefully inspected by a qualified roofing contractor. … When considering a contractor for your project, be sure to address the subject of plywood replacement, and what the cost per plank will be.

Roofs and roofing