What kind of nails do I need for cedar shingles?

Hot-Dipped galvanized, aluminum and stainless steel nails are all corrosion-resistant and all can be used to nail Western Red Cedar. Other types of nails are not recommended. They can rust and disintegrate and react adversely with the natural preservative oils present in cedar resulting in stains and streaks.

What nails do you use for cedar shingles?

Ideal nails to use on cedar wood are made from aluminum, double-dipped galvanized, or stainless steel. Other types of nails such as plain steel nails are not advisable because reactions between the nails and the siding and the environment will create ugly stains on your siding over time.

What size nails do you use for cedar siding?

Ideally, you should space the nails so that each one penetrates a stud; 8d nails, which are 2 1/2-inches long, are suitable for most siding materials. It isn’t always possible to nail into studs, especially when you’re installing shake siding.

Can you use a nail gun on cedar shingles?

“Use either rust-resistant staples or shingle nails (1-1/4” to 1-1/2” long), galvanized, in stainless steel or aluminum”. … It simply means that the best nail gun for cedar shingles will either be a stapler nail gun or any nailer that can shoots the recommended nails or staples!

IT IS INTERESTING:  Question: Can I get on the roof of my caravan?

Where do you nail cedar shakes?

When it comes to the actual installation of the shakes, you want to avoid using a nail gun completely. Instead, you should install each shake by hand, ensuring you use two nails that are four inches from the top of the shake, and one inch from the sides.

What size nails should I use for shingles?

NRCA does not recommend the use of staples for fastening asphalt shingles. Roofing nails should be round-headed, sharp-pointed 11-gauge galvanized steel or the equivalent corrosion-resistant roofing nails. Nail head sizes recommended are 3/8-inch to 7/16-inch diameter. Nail heads should be low profile, smooth and flat.

Can you blind nail cedar lap siding?

Blind nailing is an extremely weak way to attach siding that is why they say don’t do it. So don’t do it or you will be redoing it in 2-3 years.

What do you put under cedar siding?

A vapor barrier is also recommended with cedar siding. The Dupont Tyvek DrainWrap is a quality barrier with built-in channels to channel away excess water. Regardless of new or remodeling installation, Dupont Tyvek DrainWrap weather-resistant barrier is recommended before installation of the cedar siding.

How big is a 16d nail?

What is a 16d Nail? A 16d nail is one that is 3-1/2 inches long.

Can you use a brad nailer for shingles?

Large-body nailers typically include framing nailers and roofing nailers. These nailers are used for more technical projects such as framing out a basement or installing roofing shingles. … For woodworking projects, a brad nailer is a good choice. If you’re constructing a fence, a framing nailer is a good option.

IT IS INTERESTING:  Is there a coating for rubber roofs?

How do you nail cedar clapboards?

Bevel siding should be face nailed to studs with 1-1/4 inch penetration into solid wood using one nail per piece spaced at a maximum of 24 inches on center. Place nail just above the overlap. Take care not to nail through the overlap of two pieces.

How much does cedar shake reveal?

The maximum recommended exposure for cedar shingle siding is 1/2 inch less than one-half its length. For example, a 16 inch cedar shingle has an exposure of 7 1/2 inches; an 18 inch shingle has an exposure of 8 1/2 inches, etc.

What type of nails should be used to fasten shakes?

Each Certi-label Western Cedar shingle or shake should be applied with two corrosion-resistant fasteners, such as stainless steel (type 304 or 316), hot-dipped zinc coated, or aluminum nails or other fastener as accepted by your local building official. Minimum nail lengths are shown in the fastener chart below.

How many nails are in a square of cedar shingles?

The standard required amount of nails for cedar shingles is 320 pieces per square. For areas with a lot of wind, six nails for each shingle might be needed, which means you need 480 nails for each square.

Roofs and roofing