Why is my GRP roof leaking?
Leaks are caused in a fibreglass roof for a multitude of reasons. Water ingress has developed into a leak, this could be from a crack in the top coat, pinholes, faulty flashing or cracked rendering.
How do I stop my Fibreglass roof from leaking?
Sand the area heavily! ideally back to the clear Resin and re-apply some GRP Roofing Resin ensureing all pin holes are filled, you may need to apply a 2nd coat. Before any NEW topcoat is applied ensure a good wipe down with acetone is done to create a surface for the Topcoat to successfully bond to.
How do you fix a leaky GRP roof?
If you’ve got a longer crack or grp cracks then Fibreglass Crack Repair sealant is a good solution. You can just squeeze the adhesive sealant into the crack then tool it off for a smooth finish or if you want a neater look top coat the whole roof with a GRP Restoration Coating and make it look like new again.
How long will a Fibreglass roof last?
Once applied correctly, a GRP Roof will last in excess of 20 years. Once cured fibreglass is inert and it will not rot or corrode. This means little maintenance is required on this type of roofing system. A GRP Roof can be used for both domestic and commercial applications.
Should a GRP roof hold water?
GRP is highly water resistant, so it’s not as prone to leaks as felt flat roofs. However, water can still collect on the flat surface of the roof easily. If left there, it can potentially cause leaks and structural issues over time. This is known as ponding.
Can you recoat a GRP roof?
If your fibreglass roof is starting to show signs of wear and tear and you’re wondering if recoating fibreglass roofs is an option, the simple answer is yes – it is! There is absolutely no reason to replace your grp roof if it’s still in decent condition.
Can you walk on a Fibreglass roof?
Yes, a Fibreglass Roof can be walked on. A roof with little to no foot traffic expected would suit 1 layer of 450g matting, a moderate level of foot traffic should use 1 layer of 600g matting and a balcony or a roof with regular foot traffic should use 2 layers of 450g matting. …
Is Fibreglass roof better than felt?
Fibreglass is much more durable than felt and stronger too. It has no seams, so it’s less likely to fail and let water in, and it’s relatively easy for a professional to repair if damaged. … This is also more environmentally friendly, since roof felt is not widely recycled. The downside to fibreglass roofing is its cost.
Can you paint over a Fibreglass roof?
You cannot use regular roof coating on a fiberglass roof. The two popular fiberglass coatings in the market are gel coat and acrylic paint. But between the two coats, acrylic paint has a stronger hold on the roof’s surface and lasts longer than gel coat, although both provide enough protection on the roof.
Is GRP roofing any good?
Although pricier on average, GRP roofs come with a number of advantages on a level that few other flat roofing solutions can offer. As well as being more durable than traditional felt systems like pour-on or torch-on, GRP fibreglass is also a lot safer a solution.
Are GRP roofs noisy?
Where there is sometimes a noise problem experienced with these type of roofs, it is usually due to the expansion and contraction of the decking through the seasons due to the boards dimensionally reacting to thermal and moisture content changes. …
How long does GRP take to cure?
Depending on the ambient temperature a GRP roof should be cured to the touch within an hour.
Which is better Fibreglass or rubber roof?
If you have a tight budget but need a flat roof which is still of high quality, EPDM is the most cost-effective option. GRP fibreglass is often the more premium product, but this needs to be balanced with the fact it can be the stronger and longer-lasting of the two.
Is GRP roofing expensive?
As mentioned above the initial cost of GRP roofs is more expensive than other roofing systems. But compares favourably when compared over the roofs lifespan. The reason for this is fiberglass roofing benefits from some advantages that most other roofing systems cannot compete with.
How do I know if my flat roof needs replacing?
Signs your flat roof needs replacing
- Design and installation. …
- Tears, splits, cracks and exposed timbers. …
- Adhesion failure, bubbling and blistering. …
- Ponding, poor falls and small outlets. …
- Organic growth. …
- Adjoining walls and upstands.