How do you put a roof on Chief Architect?

How do you do a flat roof in chief architect?

To create a flat parapet roof

Select Build> Wall> Straight Exterior Wall and draw four walls in a clockwise manner to make a simple enclosed rectangular structure. Next, select Build> Floor> Build New Floor from the menu and in the New Floor dialog, choose Make new blank plan for the 2nd Floor, then click OK.

How do you show a roof in plan?

How to show a roof overhang in a plan view with Revit

  1. Begin by opening the plan view in which you want to see the roof line (overhang) as a hidden line. …
  2. In the properties dialog box for the view you want to see the overhang lines in set the Underlay drop-down to be the level on which the roof was created.


What is a gable roof line?

A gable roof is a type of roof design where two sides slope downward toward the walls – and the other two sides include walls that extend from the bottom of the eaves to the peak of the ridge. The purpose of your home’s roof is to protect the entire structure (and you) from weather.

IT IS INTERESTING:  Are roof racks easy to remove?

Can roofs be flat?

A flat roof is a roof which is almost level in contrast to the many types of sloped roofs. The slope of a roof is properly known as its pitch and flat roofs have up to approximately 10°. Flat roofs are an ancient form mostly used in arid climates and allow the roof space to be used as a living space or a living roof.

How do you build a flat roof in home design pro?


  1. Select Build> Roof> Build Roof .
  2. On the Roof panel of the Build Roof dialog, set the Pitch (in 12) to be 1/4″. …
  3. If you do not want the roof hanging over the edges of the structure, change the Roof Overhang for Eave and Gable to be 1″
  4. Click OK to rebuild the roof with these changes applied.


How do you change the pitch of a roof in chief architect?


  1. Using the Select Objects tool, Click on the wall that the roof section you wish to change will bear on to select it, then click the Open Object edit button.
  2. On the Roof panel of the Wall Specification dialog, specify the desired Pitch. …
  3. Repeat for all walls that will support a roof plane with a non-default pitch.


What are roof plans?

In simplest terms, a roof plan is a diagram or drawing that shows the proposed development of a roof. It contains information about the roof structure, including everything from draining and ventilation locations to the size, shape, and placement of the components.

What is a section plan?

A section plan is a vertical slice drawings showing the internal features of your property. It is similar to an elevation plan, however, it shows the internal features of the property. … The section plan is usually combined with other plans on a measured building survey.

IT IS INTERESTING:  What if all roofs were white?

Are gable roofs expensive?

Due to their rather simple design, gable roofs are often less expensive than other roof styles. The initial construction cost is lower, and because of the steep slope and reduced risk of water damage, you won’t have to worry about maintenance costs in the future.

What is the purpose of a gable roof?

Gable roof structures easily shed water and snow which make them great for areas with heavy snowfall. The steep pitch of gable roofs allows for excellent water drainage and fewer leaks. They also allow for more ventilation, and provide more space for an attic or vaulted ceilings.

Can I change the shape of my roof?

Changing the pitch of a roof is only possible when a roof’s internal and structural materials are also replaced. When a roof’s ridges, walls and rafters are switched out, there is a chance to create a new architectural design that can change the pitch of the roof.

Roofs and roofing