What kind of OSB is used for roofing?

Typical types of wood used for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, with no edge support, can be used in an area where the snow load is 30 pounds per square foot. With edge support and the same snow load, 3/8-inch OSB can be used.

Is 7/16 OSB OK for roofing?

…or a non-laminated panel, such as this OSB. Either one is acceptable. The typical thickness of roof sheathing is about 7/16-inch, which is just under 1/2-inch. … If you find 3/8-inch plywood installed as roof sheathing, it’s a good idea to make your client aware of its presence.

What is the best roof sheathing?

OSB is now the most-used sheathing and subflooring material for new roofs and roof replacements. OSB is currently selling for less than plywood by approximately $3 per sheet, meaning a savings of several hundred dollars per conventional home.

Both the National Roofing Contractors Association and the Asphalt Roofing Manufacturers Association recommend the use of OSB for roof sheathing, as long as it bears the approval stamp of the APA – Engineered Wood Association.

IT IS INTERESTING:  Best answer: Can you paint over rust on a tin roof?

How thick should Roof OSB be?

What is the Standard Roof Sheathing Thickness? Standard roof sheathing thickness is ½” to ⅝” thick. If you are using OSB for your roof deck, then ⅝” is the recommended thickness. For plywood, which is slightly stronger than strand board, ½” thick is appropriate.

Which side of OSB goes down?

Which side of OSB subfloor goes up? “This side down” applies to when it’s used as subflooring. That side should be facing down, against the joists. When used as wall sheathing, that side should be against the studs.

Are clips required for roof sheathing?

For the most common roof sheathing in our area, which is 1/2” nominal (7/16” actual) sheathing over trusses or rafters at 24” on center, there is no requirement for H-clips. … One or two H-clips will often allow a longer span between roof trusses/rafters.

What is better for roof sheathing OSB or CDX?

CDX and OSB are used for almost similar things, but because they have different features, one is better applied in some tasks and the other one on other tasks. CDX is best for sub-flooring. … OSB also seems to be good for roof sheathing. But take care, it also requires that you use water-resistant coating at the edges.

Which is better OSB or plywood?

Wood fiber is used more efficiently in osb. Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists.

IT IS INTERESTING:  How do I get rid of moss on my roof UK?

Should plywood go under metal roof?

For many applications, a layer of plywood underneath your metal roofing is an unnecessary expense. … Boards measuring 1 inches by 4 inches or 2 inches by 4 inches are commonly used for purlins, though never use treated lumber because it will corrode the steel roof and fasteners.

How do you protect OSB from rain?

If you need to utilise Oriented Strand Board (OSB) to sheathe your shed’s walls, then you would need to construct those walls like the walls of a house. This means you would need to use a moisture-resistant barrier over the OSB and then cover it with siding.

Can I put metal roofing over OSB?

No, you do not need to screw into solid lumber (joists, stripping,etc.). As you can see, the thinnest material they recommend is 1/2” (7/16”) OSB board at 9” on center up to 24” on center. Be sure to follow their instructions in order to obtain the warranty. Metal roofing screws need to go into framing.

Why is OSB so expensive?

So what does this mean for prices? An oligopoly has few producers but many buyers. When industry production capacity exceeds demand, OSB pricing resembles a competitive market. The few producers will compete with each other for business in order to keep their enormous, expensive, manufacturing plants producing 24/7.

Is OSB OK for shed roof?

For an inexpensive, value option 9mm OSB can be used for your garden shed roof. Start by fitting the beam across the top of the shed, slotting it into the pre-cut grooves at the top of the two pointed ends on an apex shed (known as the gable ends).

IT IS INTERESTING:  What can you carry on soft roof racks?

What size OSB should be on exterior wall?

According to the California Uniform Building Code, the minimum recommended thickness for structural panels used in wall sheathing is 5/16 inch for studs 16 inches on center and 3/8 inch for studs 24 inches on center.

Roofs and roofing