Quick Answer: What part of the roof is called the rake?

Rake—The slanting edge of a gable roof at the end wall of the house. Ridge—The horizontal line at the top edge of two sloping roof planes. Sheathing—The decking material (usually sheets of plywood), which is nailed to the rafters, and to which shingles or other outside roofing materials are secured.

What is a roof rake?

A rake is the sloped part of the end of the gable in gable roofs, or the trim for gables. Rakes are another area on the exterior of your home (in addition to soffits and fascia) that can be customized to match the trim of your home. They can be intricate or simple in design, flat or sloped.

Where is the rake edge on a roof?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.

IT IS INTERESTING:  Can a tiled roof be replaced with colorbond?

What is the rake board on a house?

This roofing term describes the exposed outer portion of a gable roof that extends from the eave to the ridge. … The rake can be flat with no overhang or it can hang over the roof gable end like an eave. You can close in this overhang or leave it open.

What is a gable rake?

Also known as rake trim, gable trim is a finishing piece of metal flashing used along the edges of a metal roof line where the edge of the metal roof panel meets the endwall panels.

When should you roof rake?

If your roof is flat or has a low slope, roof raking is definitely a must once the snow gets to be about 6 inches or more. If your roof has a higher pitch, it’s still something to consider, especially if the snow is wet and heavy and it is building up.

What are the sides of a roof called?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

Do I need a drip edge on rake edge?

Without a drip edge, water may end up beneath the shingles and may cause damage to various parts of the home. Though your home may not have originally had a drip edge installed, drip edges are now required by most building codes across North America to protect homes from damage.

Does drip edge go around entire roof?

The correct placement of a roof drip edge is on top of the roof’s exterior cover directly between the sheathing and the fascia board, which forms a drainage gap between the drip edge and the fascia board. As a result, the drainage improves water flow and protects the roof from potential water damage.

IT IS INTERESTING:  Question: How wide is galvanized metal roofing?

What is the difference between drip edge and rake edge?

Drip edge and rake edge are the first parts of the roof system to be installed. They form a long, narrow piece of metal, which is installed along the perimeter your Roof Deck. Drip edge goes along your eaves trough areas and rake edge goes along your gable ends.

What is the average cost to replace fascia boards?

Average Cost to Install Fascia and Soffit

Average Cost $2,300
High Cost $6,000
Low Cost $600

What is the difference between rake and eave?

An Eave is defined as the edge of the roof that overhangs the face of a wall. This is the portion of the roof that protrudes beyond the side of a house or building. In contrast, a Gable (or Rake) is the overhang of a building that occurs on the side that is topped by a gable roof.

What is the peak of a house called?

Primary Structure

Ridge – The top peak of a gable roof running horizontally where two sloping sides meet. Hip – A downward sloping junction of the roof where sloping sides meet.

Are eaves and soffits the same thing?

Remember that an eave is the lower edge of a roof which projects beyond the face of the wall. … So in summary, an eave is part of a roof system and a soffit, in that context, is part of the eave. Clearly, eaves and soffit are two different parts of the same structure.

Do you need drip edge on gable ends?

Drip edges also help prevent shingles at the end of a roof from cracking, sagging, and becoming limp. Drip edges can also be installed on the gable ends of a roof. They add a clean, trimmed look to a roof while preventing water from entering into undesirable areas.

IT IS INTERESTING:  Best answer: How long do modified bitumen roofs last?

What are rakes?

A rake (Old English raca, cognate with Dutch hark, German Rechen, from the root meaning “to scrape together”, “heap up”) is a broom for outside use; a horticultural implement consisting of a toothed bar fixed transversely to a handle, or tines fixed to a handle, and used to collect leaves, hay, grass, etc., and in …

Roofs and roofing