You asked: What is roof rake edge?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.

Is rake edge required?

The IRC now requires a drip edge for all asphalt roof installations and provides direction for its proper installation. Underlayment must lap over the drip edge at the eaves. At the rake edges (the sloped edges that are referred to as “gables” in the code text), the drip edge must be installed over the underlayment.

What’s the difference between drip edge and rake edge?

Drip edge and rake edge are the first parts of the roof system to be installed. They form a long, narrow piece of metal, which is installed along the perimeter your Roof Deck. Drip edge goes along your eaves trough areas and rake edge goes along your gable ends.

IT IS INTERESTING:  Can an aluminum roof be painted?

What is the edge of the roof called?

Eaves. The lower edge of a roof (usually overhanging beyond the edge of the house).

What is eave VS rake?

An Eave is defined as the edge of the roof that overhangs the face of a wall. This is the portion of the roof that protrudes beyond the side of a house or building. In contrast, a Gable (or Rake) is the overhang of a building that occurs on the side that is topped by a gable roof.

Does drip edge go around entire roof?

The correct placement of a roof drip edge is on top of the roof’s exterior cover directly between the sheathing and the fascia board, which forms a drainage gap between the drip edge and the fascia board. As a result, the drainage improves water flow and protects the roof from potential water damage.

Do you have to replace drip edge when replacing roof?

Drip edge is the metal flashing that’s installed at the edges of the roof to help control the flow of water away from your fascia and other roofing components. The drip edge has to be replaced when you get a new asphalt roof.

Should gutters be installed under drip edge?

It is recommended that gutters are placed under or ‘behind’ the drip edge of your roof. … If gutters are installed below the drip edge, water can drip behind the gutter and cause damage to the wood supporting the gutter system.

Do you nail down drip edge?

Nail the drip edge to the roof deck with minimum 12-gage roofing nails spaced 8 to 10-inches on center and 1-½ to 3-inches from the edge of the sheathing. Adjacent drip edge pieces should be lapped minimum 2 inches. Asphalt shingles should overhang the exterior edge of the drip edge by ¼ to ¾-inch.

IT IS INTERESTING:  Quick Answer: Is a roof leak a major defect?

Does drip edge go over or under underlayment?

Does Drip Edge Go Over or Under Felt? According to most building codes and manufacturer recommendations, the drip edge should be installed beneath the underlayment along the eaves of the roof. But over the underlayment along the rake edges of the roof.

What goes on roof before shingles?

Sometimes called roofing felt underlayment, roofing tar paper, or roll roofing, this is a layer of protection installed between the roof deck and the roofing shingles.

What are pieces of roof called?

These are the parts of a house’s roof:

  • Roof plane: This is the surface of the roof. …
  • Ridge: This is the top or peak of the roof, where two roof planes meet.
  • Valley: This is where two pitched roof faces connect and project inward. …
  • Dormer: This is a roof feature that projects out from the roof face.

30.06.2018

What part of a roof is the rake?

A rake is the sloped part of the end of the gable in gable roofs, or the trim for gables. Rakes are another area on the exterior of your home (in addition to soffits and fascia) that can be customized to match the trim of your home. They can be intricate or simple in design, flat or sloped.

What does the rake mean?

The Rake is a monster in the online horror fiction genre, creepypasta. It is depicted as an unusually tall, hairless, pale, humanoid creature who generally crouches or crawls on all fours.

Are eaves and soffits the same thing?

Remember that an eave is the lower edge of a roof which projects beyond the face of the wall. … So in summary, an eave is part of a roof system and a soffit, in that context, is part of the eave. Clearly, eaves and soffit are two different parts of the same structure.

IT IS INTERESTING:  Do solar companies pay for a new roof?
Roofs and roofing