# You asked: How many strips are in a bundle of shingles?

Contents

Starter Strip is packaged two pieces per shingle, 16 shingles per bundle, 105 lineal feet. You can cap about 35 lin. ft. of ridge or hips with each bundle of three-tab shingles that come three bundles to the square.

## How many nails come in a bundle of shingles?

Generally, you should use four nails per shingle in the field of the roof, and 5 nails per starter shingle. For regular three-tab shingles, this would require 320 nails per square for field shingles.

## How much will one bundle of shingles cover?

In the roofing industry, squares refer to 100-foot portions of roofing. A single bundle of shingles usually contains enough to cover 33 square feet.

## How many shingles are in a bundle of 3-tab?

A bundle of 3-tab shingles can range from 21 up to 29 shingles. While 26 is a common number of shingles per bundle for 3-tab shingles, there are 3-tab varieties that are wider and taller, which results in bundles with a smaller number of shingles.

## How much does a pallet of shingles cover?

A pallet of shingles can hold up to 42 bundles. The pallet weighs in between 2,100 and 3,350 pounds. A square of shingles is 100 square feet.

## How much does a bundle of shingles cost?

Shingles Prices Per Bundle and Per Square

Type Per Square* Per Bundle**
Asphalt/Composition \$100 – \$150 \$30 – \$50
Metal \$300 – \$1,800 \$100 – \$600
3D/Dimensional \$480 \$160
Cedar/Wood \$480 \$160

## How many bundles of shingles do I need for 1000 square feet?

It typically requires 3 bundles to cover one square, or 100 square feet. If one is using 3-tab, there are 27 shingles to a bundle, therefore 81 shingles to a square, therefore 810 shingle per 1000 square feet.

## How heavy is a bundle of shingles?

A single square can weigh between 150-240 pounds, with a single bundle being between 50-80 pounds.

## How many bundles of shingles do I need for 1200 square feet?

How many bundles of shingles do I need for 1200 square feet? The average bundle of shingles covers 33.3 ft2, so three bundles of shingles are needed per square.

## How much is a bundle of shingles at Lowe’s?

The Onduvilla shingles cost about \$50 per bundle (20 sq. ft.) or \$250 per square, with 10 pieces in each bundle. Both Lowe’s and Home Depot stores provide all the roofing accessories including underlayments and Ice-and-Water shields, ridge caps, and vents, to make for a complete roofing system.

## How many bundles of shingles do I need for a 12×12 roof?

As a rule of thumb, there are 3 bundles to a square, assuming that you are using three-tab strip shingles. There are also 29 standard-sized shingles (measuring 12 inches by 36 inches) in each one of these. With that as background, you are now ready to estimate how many shingles you will purchase for your roof project.

IT IS INTERESTING:  You asked: What is the minimum slope per foot on a flat roof?

## What is the lifespan of 3 tab shingles?

Their average lifespan is about 18 to 20 years. However, they may last up to 30 years under optimal conditions. When 3-tab shingles are exposed regularly to severe weather, they may last about 7 to 10 years. In areas with mild climates, they may last as long as 12 to 15 years.

## What’s the price of 3 tab shingles?

Asphalt shingles cost breakdown

PRODUCT COST
3 – Tab (standard) \$25 – 30 / bundle or \$75 – 90 / square
Standard Architectural (Laminated) \$28 – 32 / bundle, or \$84 – 96 / square
Premium Architectural (Laminated) \$45 + / bundle or \$135 + / square
Energy-Efficient (Cool Roof) \$40 + / bundle or \$120 + / square

## How many bundles of shingles do I need for 1700 square feet?

The shingles cover 33.3 sq. 57 bundles is a ft. 1,700 / 33.3 + 10% for trim.

## How do I calculate shingles?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane.

## How many shingles do I need for a 10×10 shed?

Quick answer —-> One square. 3 pieces of plywood equals 10ftx10ft. Three bundles but probably four because that would fit it perfectly and even on a tiny little shed 5–10% needs to be calculated in for waste and mishaps.