# You asked: How do you calculate cedar shake roofing?

Contents

## How much cedar shake do I need?

A standard bundle of white cedar shingles covers 25 sq. ft (2.3 m2) if the exposure is 5 in (12.5 cm). Cedar shingles are measured in squares, 1 square = 4 bundles.

## How do I calculate how many cedar shingles I need?

How to Calculate Cedar Shingles Coverage

1. Measure the width and height of one section of the roof, and multiply the numbers together to get the square footage of that section. …
2. Divide the square footage of the roof by 100 to get the number of “squares” needed.

## How much is a cedar shake roof per square foot?

A cedar shake roof averages \$3.50 to \$8.50 per square foot. It is highly durable and can easily last 50 years or longer when properly installed.

## How many wood shakes are in a square?

Square and Bundle

IT IS INTERESTING:  Frequent question: What type of roofing is used on flat roofs?

Bundles are usually packed so that four bundles of shingles or five bundles of shakes constitute a square.

## How much does a bundle of cedar shakes cost?

Cedar shakes cost around \$130 per bundle or \$400 per square.

## How much does it cost to put cedar shakes on a house?

Cost Basics. The average cost to install cedar shake siding ranges from \$8.50 to \$14.50 per square foot, depending on job complexity and location. You can expect to pay between \$17,000 and \$29,000 for a contractor to install new cedar shake siding on a typical house with 2,000 square feet of siding.

## How much does a square of cedar shingles cost?

The average roofing installation price for a cedar shingle roof costs anywhere between \$7,649 to \$11,474 on an 1,800 sq. ft home. You can expect to pay \$4.50 to \$9.00 per sq. foot or \$450 to \$900 per square for wood shingles when installed on a standard sized single story home.

## How many square feet does 1 bundle of shingles cover?

Calculating the number of bundles, you need is simple if you are using shingles that come three bundles to a square. Each bundle covers 33.3 sq. ft.

## How many nails are in a square of cedar shingles?

The standard required amount of nails for cedar shingles is 320 pieces per square. For areas with a lot of wind, six nails for each shingle might be needed, which means you need 480 nails for each square.

## What is the difference between cedar shingles and cedar shakes?

Appearance – Cedar shingles have a smooth and uniform look that spans the entire roof surface while cedar shakes have a more rugged appearance because each piece looks a little different than the rest. … Cedar shakes are split off while shingles are sawn smooth on both sides and cut tapered.

IT IS INTERESTING:  Can roofs be made of concrete?

## Are cedar shake roofs a fire hazard?

At Issue : Should Wood Roofs Be Banned? : NO : Cedar Shingles Can Be as Safe as Alternatives. … Actually the roofs involved in those–and other major Southern California fires–were not composed of pressure-impregnated fire-retardant shakes and are not permitted under the current building codes.

## When should I replace my cedar shake roof?

As long as it’s properly installed and with proper maintenance, you can expect to get 30 years of life out of your cedar shake roof. If you invest in quality materials and live in an area with the right conditions, you could possibly get up to 50 years out of it.

## What is the maximum exposure of 24 wood roofing shakes?

The roofing shake thickness ranges from 1/2″ to 1 1/4″ where measured at the shingle butt. The maximum exposure for wood shakes is 7 1/2″ (for an 18″ long wood shake) or 10″ (for a 24″ long wood shake), and head lap is 3″ or 4″ respectively.

## How much does a square of cedar shakes weigh?

Because you may need 3+ bundles of wood shingles per square of roofing, the total weight per square is quite the wide range; between 600 and 2,100 pounds per square.

## How many bundles of shingles make a square?

Here are a couple more examples: A package of shingles is called a bundle. 3 bundles = 1 roofing square (98.4 sq. ft.)