For steep-slope roof systems, IBC 2018 provides for a 1:12 minimum roof slope for mineral-surfaced roof roll roofing; 2:12 minimum roof slope for asphalt shingles, photovoltaic (PV) shingles and building-integrated PV; 2 1/2:12 minimum roof slope for clay and concrete tile; 3:12 minimum roof slope for metal roof panels …

## What is the minimum allowable roof slope?

The smallest pitch of a roof is 1/4:12, which translates to 1/4 inch rise to 12 inches of run. Such a small pitch can only work with built-up roofing or specialized synthetic roofing. Covered porches that are near trees or in areas with heavy rains should not be covered with a low-slope roof.

## What is considered steep slope roofing?

Steep slope roofing usually refers to roofing materials suitable for roofs that have slopes of 3:12 or greater. This means for every 12 horizontal inches, the roof’s rise is three vertical inches or greater.

## What is the steepest roof pitch you can walk on?

Common Roof Slopes Expressed in Rise/Run and Angle + Slope expressed as Grade

Common Roof Slopes Expressed in Rise/Run and Angle + Slope expressed as Grade | ||
---|---|---|

Roof Slope Expressed as Rise / Run in Inches | Roof Slope Expressed as an Angle | Walkability |

3 / 121 | 14.04 ° | Easy to walk on |

4 / 12 | 18.43 | |

5 / 12 | 22.62 ° |

## What is the minimum slope for steel roofing?

The minimum slope for lapped, non-soldered seam metal roofs without applied lap sealant shall be three units vertical in 12 units horizontal (25-percent slope). The minimum slope for lapped, non-soldered seam metal roofs with applied lap sealant shall be one-half unit vertical in 12 units horizontal (4-percent slope).

## What is the most common roof pitch angle?

The most commonly used roof pitches fall in a range between 4/12 and 9/12. Pitches lower than 4/12 have a slight angle, and they are defined as low-slope roofs. Pitches of less than 2/12 are considered flat roofs, even though they may be very slightly angled.

## What does a 2 12 pitch roof look like?

A 2/12 roof slope means your roof has 2 inches of vertical drop for every 12 inches of horizontal distance. Simply put, it’s a shallow roof. … A roof this shallow is likely to be found on a ranch house, a shed dormer or a porch.

## What are the major differences between a low slope roof and a steep roof?

Roofs with slope greater than 17 percent are generally termed as steep roof. The main difference between a steep roof and a low slope roof is that, a steep roof drains quickly giving wind and gravity a opportunity to push or pull water through the roofing material. Steep roof can be covered with roofing materials.

## Is an 8 12 pitch roof steep?

Steep pitch vs. low pitch styles

As an example, 8/12 means that for every foot, the rooftop rises 8 inches. Slopes around 6/12 are the most common, while anything below 4/12 is typically considered a low pitch. A steep pitch has several advantages.

## Is a 10 12 pitch roof steep?

So a roof pitch of 10:12, as seen below, means for every 12 horizontal inches of roof, the roof rises 10 inches. This is a steep slope roof.

## What is the disadvantages of a steep pitched roof?

Steep-slopes have a few disadvantages. One important weakness is that they decrease utility space on the roof. … The most common problem arising from steep-slope roofs is clogged gutters that result from the run-off debris. This requires regular cleaning.

## What does a 6 12 pitch mean?

One of the most commonly used terms in roofing. … Roof pitch (or slope) tells you how many inches the roof rises for every 12 inches in depth. An Example of a roof pitch would be a “6/12 pitch” which means that the roof rises 6 ” for every 12″ inward towards the peak (or ridge).

## What roof pitch is not walkable?

The roof’s pitch is the angle of the roof, usually presented as the inches of vertical “rise” over 12 inches of horizontal “run.” Generally anything above a 7/12 is considered a non-walkable roof and requires some extra equipment and usually some extra cost to the customer.

## Can you put a metal roof on a low slope?

Metal roofing systems, such as a standing seam roof or a corrugated metal roof, are ideal for low-slope applications that aren’t “flat” roofs. These metal panels come in large sheets that cover the length of your roof from your ridge to your gutter.

## What should I use on a low slope roof?

That’s why the most common option for low slope roofs are membrane roof systems. Membrane roof systems are sheets, either 5 foot, 10 foot, 20 foot wide sheets of rolled synthetic, water repellent membrane. There are 3 types of membrane roof systems: EPDM, PVC, and TPO.

## What roof pitch is 5 degrees?

4/12 roof pitch angle = 18.43 degrees.

…

What is the pitch of a 5 degree roof?

Roof Pitch (slope) | Roof Angle (degree) |
---|---|

4:12 Pitch | 18.43° |

5:12 Pitch | 22.62° |

6:12 Pitch | 26.57° |

7:12 Pitch | 30.26° |