What is the safe method of working on a fragile roof?

Control: Work on or near fragile surfaces requires a combination of stagings, guard rails, fall restraint, fall arrest and safety nets slung beneath and close to the roof. Communication: Warning notices must be fixed on the approach to any fragile surface.

What should be ensured before starting work on fragile roof?

2. Before starting work (i.e. before climbing on the access ladder) ensure that the supervisor is available at site and he has got the work permit issued by the authorised person. 3 Use suitable and sufficient access ladders, cat ladders, crawling boards etc. and fix them properly on the roof.

What is the best way to stop people falling through fragile roof panels?

Kee Cover is a mesh cover that protects workers against falls through fragile roof lights. The mesh panel top sits onto a metal frame made from Kee Klamp fittings and tube. Kee Cover is suited to metal profile roofs where inline roof level skylights are common.

IT IS INTERESTING:  How much value does a new roof add to appraisal?

What is a fragile roof?

Fragile roofing materials include: Rooflights and Perspex sheeting, often difficult to identify due to weathering. Liner sheets on built up roofs. Unreinforced cement sheets including asbestos cement sheeting. Glass (including wired glass)

a. The person who is in control of a workplace is responsible for ensuring that the access from the ground to the work area on the roof is safe and without risk to health. … Access requirements should take into account any tools and equipment the roof worker may be required to carry to and from the work site.

What is a common example of a fragile roof material?

Typical fragile materials include asbestos cement sheets, old roof lights, non-reinforced fibre cement sheets, corroded metal sheets, glass (including wired glass), slates and tiles.

What is fragile material?

Fragile Material is a surface or assembly that is liable to fail either from the weight of anyone crossing, working or falling on it. (Here, the person’s weight includes the weight of anything that they may be wearing and carrying).

Can you fall through the roof?

While a roof is designed to handle weight and pressure that is distributed across the tresses, it is not designed for this concentrated force. If your roof is in a state of disrepair or lacks structural integrity, this excessive stress could actually cause you to fall through the roof!

What are two of your responsibilities when working at height?

Dos and don’ts of working at height

ensure equipment is suitable, stable and strong enough for the job, maintained and checked regularly; take precautions when working on or near fragile surfaces; provide protection from falling objects; consider emergency evacuation and rescue procedures.

IT IS INTERESTING:  Frequent question: How do I stop starlings nesting in my roof?

At what height is a person considered to be working at height?

Previous regulations defined “Work at Height” as being at least two metres high above ground level.

What are the hazards of scaffolding?

The following are some of the most common scaffolding hazards to be aware of.

  • Debris, Tools, and Materials. …
  • Lack of Fall Prevention. …
  • Poor Scaffolding Assembly. …
  • Scaffolding Damage. …
  • Electrical Wires. …
  • Untrained Employees.


What is crawling board?

A plank with cleats spaced and secured at equal intervals, for use by a worker on roofs; not designed for transporting material.

What is the first step in the hierarchy of control measures?

Eliminating the hazard and risk is the highest level of control in the hierarchy, followed by reducing the risk through substitution, isolation and engineering controls, then reducing the risk through administrative controls.

Do roofers wear harnesses?

Fall protection harnesses are only one option among many fall protection systems. However, they are widely used by residential roofers. Usually, roofers do not want to spend the time to set up guardrail systems on a residential home. Fall protection harnesses are a convenient and safe alternative.

How can I work on my roof safely?

Here are some tips for working safely on a roof:

  1. Leave steep and/or high roof work to the pros. …
  2. Pick a clear, calm, cool time of day to work on roofs. …
  3. Wear shoes with a soft rubber sole for extra traction.
  4. Keep the bottom of your shoes free of mud and dirt, and the roof swept clear of dirt and debris.
IT IS INTERESTING:  How much weight can your roof hold?

Is it illegal to work on a roof without scaffolding?

Much of the official health and safety advice states that, for any domestic roof repairs, scaffolding is needed. But scaffolding can seem unnecessary for small one-man jobs, so in these cases, it is often considered perfectly acceptable to use a ladder that is safely secured.

Roofs and roofing