How much does it cost to install EPDM roof?

Expect to pay between $6.50 and $12.50 per square foot to install EPDM membrane on a typical flat roof, or about $9,750 to $18,750 for a 15 square (1,500 square feet) low-slope roof replacement.

What is the cost of EPDM roofing per square foot?

The Cost of an EPDM Roof

If you decide to go with an EPDM roof installation, you should expect to pay somewhere between $4 to $8 per square foot which works out to be about $6,000 to $12,000 for 1,500 square feet of roof.

How much does it cost to have a rubber roof installed?

Rubber roofing costs anywhere between $8,000 to $14,000 to install depending on the slope, pitch, and size of your roof. You can expect to pay $4.25 to $8.25 per sq. foot or $425 to $8825 per square installed on a standard sized single story home.

How much does EPDM roofing cost?

Anyway, EPDM is also fit for new-build construction projects. Installing an EPDM roofing costs about £45 per m² on average. When the old roofing material and the roof construction need to be removed, the total cost will be much higher. Roof insulation will entail extra costs as well.

IT IS INTERESTING:  Question: What are 2 common failure modes for asphalt shingles?

Does EPDM have to be glued down?

When you are fitting an EPDM roof, you need to make sure that it is glued down properly. During the membrane application process, you will need to apply two different types of adhesive. The first is a water-based adhesive. Use Permaroof deck adhesive for the best results.

Which is better TPO or EPDM?

TPO has better dimensional stability than EPDM. EPDM is more likely to shrink which can cause a variety of problems on your roof.

Is TPO more expensive than EPDM?

TPO roofing membranes are more expensive than EPDM. Regardless of which membrane you choose, it is better to spend more money and invest in a thicker membrane. Both EPDM and TPO roofs perform better and last longer if they are thicker.

Are rubber roofs any good?

Rubber roofing is suitable for extreme conditions, giving you one of the most durable and reliable roofs available that typically lasts between 30-50 years. In time, you may find a felt flat roof can pick up moss and algae; the synthetic rubber doesn’t support the growth of moss so you are guaranteed a clear roof!

Are rubber roofs more expensive?

Rubber roofing can go where typical asphalt roofing cannot due to its flexible nature. Rubber shingles can be more expensive than asphalt shingles, but they are cheaper than slate shingles and equivalently fire resistant.

How long will a rubber roof last?

Rubber roofing, when installed professionally, can last 25 years or more. TPO and EPDM roof systems have similar lifespans of 20 to 25 years. High-quality TPO roofing that is reinforced with fiberglass can last even longer.

IT IS INTERESTING:  Your question: Why does my roof look dirty?

Can you walk on EPDM?

Full Answer. All of our roofing systems are designed to take foot traffic and will withstand access to the roof for window cleaning and general maintenance The EPDM systems can be walked on both during and after installation, EPDM is designed to take LIGHT foot traffic for occasional cleaning or maintenance.

Is EPDM cheaper than felt?

Rubber roofing like EPDM is considered a far superior product than traditional felt thanks to the wide range of benefits on offer. … On the flip side, EPDM is often a more premium choice (although still cheaper than GRP fibreglass).

Can EPDM be installed on plywood?

EPDM should be bonded over 5/8″ plywood, 5/8″ OSB board, or polyisocyanurate board with a fiberglass backing.

How long does an EPDM roof last?

EPDM roof membranes remain stable over time and can have a life expectancy of over 50 years. ** Made from synthetic rubber, EPDM roofing membranes have two primary ingredients, ethylene and propylene, which are derived from oil and natural gas.

Can EPDM be laid in the rain?

Full Answer. EPDM Membranes require the sustrate to be dry prior to installation. … EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.

How long does EPDM take to dry?

Partial cure or “a skin” occurs about 24 hours when the temperatures are above 50 degrees, 72 hours until you can walk on it and a full cure normally within 7 days depending upon temperature.

IT IS INTERESTING:  Why are roofs painted black?
Roofs and roofing