Install intake vents at the eaves or in the lower portion of the roof or attic space. Install exhaust vents at the ridge or in the upper portion of the roof or attic space. Locate the intake and exhaust vents to assure air flow in all areas of the attic space.
How can I increase the airflow in my attic?
If your home is fitted solely with small gable-end vents or a ventilator high in the roof, you might want to consider adding soffit vents to increase airflow. These vents allow outside air to enter the attic at the lowest point of the roof—along the underside of the eave.
How do you vent a low slope roof?
Use double gable louver vents in a low slope roof. Because there is only a small rise in the attic, using two vents on opposite sides of the gable encourages proper air circulation. A louver vent installs at the very top of each gable and looks like a small setout in the siding.
How do you ventilate a roof space?
The most popular roof ventilation solution is to have soffit vents providing cool, fresh air into the loft from a low level, and a tile vent or ridge vent at a high level for the warm stale air to exit the building.
How do you balance attic ventilation?
As exhaust vents (typically ridge vents or off-ridge vents) pull air out of the attic, the intake vents replace this “lost” air, drawing in air from outside. Location of the vents is also very important. Intake vents should be installed in soffits or lower on the roof slope near the eaves.
What happens if your attic is not vented?
But in homes without appropriate insulation and ventilation in the attic, heat migrates. … Meanwhile, because hot air is full of moisture, all that water hanging out in your attic is causing condensation to build up. Excess heat and condensation can cause major damage to your roof and roofing materials.
How do you tell if attic is properly vented?
How to determine whether you need better attic ventilation
- Look at your eaves and roof. …
- Touch your ceiling on a warm, sunny day. …
- Thick ridges of ice on your eaves in winter are a sign of poor attic ventilation. …
- Warm air that escapes living space also carries moisture that will condense on rafters or roof sheathing.
What is considered a low-slope roof?
Low- slope roofs typically have a minimum slope of one-fourth inch vertical to twelve inch horizontal (¼:12 or 2 percent) depending on the roofing material. Roofs are considered low-slope roofs up to 3:12 pitch. Low-slope roofs traditionally have been constructed with an asphalt built-up roof covering.
What type of roof vents are best?
In most cases, we recommend soffit vents for intake and a ridge vent for exhaust. For homes that cannot have a ridge vent, box vents are generally the second best option for exhaust. And for homes that cannot have soffit ventilation, you will find that fascia vents to be your second best bet.
How do you insulate a low pitch roof?
There are lots of ways to insulate a low-slope roof, and most of them are wrong. In older buildings, the usual method is to install fiberglass batts or cellulose on top of the leaky ceiling, with a gap of a few inches (or sometimes a few feet) between the top of the insulation and the roof sheathing.
Can a roof have too much ventilation?
The two main dangers associated with too much ventilation involve roof damage and increased utility bills. If you have too much air circulating, your roof will collect moisture causing damages that will weaken spots and then cause leaking.
Can too much insulation cause condensation?
Too much insulation and a lack of ventilation and your home may experience issues such as stuffy, stale and unpleasant air along with related problems such as condensation, mould and damp.
Does soffit need to be vented?
While soffit comes in wood and aluminum, they are most commonly made of vinyl for durability. Soffit can be non-vented or vented to allow for maximum roof ventilation. Non-vented or continuous soffit works best when your roof has narrow eaves or if you need to ventilate a large amount of attic space.
Can I have too much ventilation in my attic?
It’s possible to have too much exhaust ventilation, but you cannot have too much intake ventilation. If there is more intake ventilation than the attic’s square footage requires, it’s not problematic because any excess intake converts to “exhaust” on the leeward side of the house.
How can I vent my attic without soffits?
To ventilate your attic without soffits you can use gable vents, eyebrow vents, a venting drip edge, a shingle-over intake vent, wind turbines, or power vents. All are good alternatives if you cannot install soffit vents; however, a very important factor for good ventilation is good insulation.
How do I know if my soffit vents are working?
There are two easy ways to check this. If you can get into the attic when it’s dark (or bring a flashlight but then turn off the attic lights), see if you see light when looking into the eaves – if so there were openings cut. If not there were either no openings or they are blocked.