Article 336-18 stated that cable must be secured in place at intervals not exceeding 4.5 feet (1.37 m) and within 12 inches (305 mm) from every cabinet, box,…

Roofs and roofing

Peel & Seal® can easily be cut with scissors or a sharp utility knife (Figure 2). Peel & Seal® adheres to the deck and to itself when overlapped….

Roofs and roofing

Set the depth of your circular saw to the thickness of the roof decking. Cut away the damaged area. Pry out nails with a claw hammer or pry…

Roofs and roofing

How do you stick foam insulation to metal? Hold the nozzle of an aerosol contact adhesive 4 to 6 inches away from the metal. Depress the can tip….

Roofs and roofing

Yes it can be removed. If you aren’t installing new rack, then put silicone around the holes then put waterproof tape. Are roof rails universal? You can purchase…

Roofs and roofing

Roofers made an average ​$22.03​ per hour, or ​$45,820​ per year, as of May 2019, according to the Bureau of Labor Statistics (BLS). The highest paid earned more…

Roofs and roofing

Because the thickness, weight, and shape of shingles vary, manufacturer’s instructions vary slightly. But virtually all manufacturers agree that nails should be installed below the adhesive strip. Do…

Roofs and roofing

A flat roof is a roof which is almost level in contrast to the many types of sloped roofs. The slope of a roof is properly known as…

Roofs and roofing

While most metal roofing styles can be installed as an advanced DIY project, metal roofing installation is complicated and can vary slightly based on the brand of panels…

Roofs and roofing

Homeowners insurance may cover a roof leak if it is caused by a covered peril. … In those cases, your homeowners policy may help pay to repair the…

Roofs and roofing